Bodemvochtsensor WaterScout SM100 Bodemvochtsensor gebruikt in potten met Hand Reader Bodemvochtsensor met Hand Reader gebruikt in vollegrond Bodemvochtsensor plaatsing in boorgat van 10cm
Bodemvochtsensor WaterScout SM100 Bodemvochtsensor gebruikt in potten met Hand Reader Bodemvochtsensor met Hand Reader gebruikt in vollegrond Bodemvochtsensor plaatsing in boorgat van 10cm
WaterScout SM100 Soil Moisture Sensor with 6.1m cable
0 Review | Add review
The WaterScout SM100 soil moisture sensor is a capacitive sensor that indicates the amount of moisture in the soil as a percentage of the total soil volume.

Product number

040102

€ 99,00
Price per unit
Quantity: 
Order
 
Wishlist

The key is knowing both when and how much to water!

Maintaining a healthy soil moisture and water balance is essential for producing high quality plants. Under-watered plants suffer from nutrient deficiencies, stunting and wilting. Conversely, over-watered plants are more susceptible to disease pressure and less tolerant of dry conditions later on in their life cycle. Extreme over-watering will suffocate the plant and lead to root death.

  • Measures Volumetric Water Content (VWC) of soil
  • Capacitance-type sensor responds immediately to changes in soil moisture content for better irrigation decisions
  • Calibrated for mineral soils or soilless media
  • Installs easily into 3/4 in (1.9 cm) hole
  • Install permanently or use to take spot measurements
  • Can be read with the FieldScout® Soil Sensor Reader (Item 6466) or WatchDog® 2000 and 1000 Series Stations
  • Connect up to 8 sensors to one station Not compatible with 400/200 loggers. WatchDog Stations sold prior to 2009 must be upgraded. (call for support)

Order by:

Add review

No reviews found.

Standard Interface:
FieldGuard Station or FieldScout soil moisture reader
Range:
0% VWC to saturation
Power supply:
3 to 5V @ 6 to 10 mA
Output signal:
Analog voltage 0.5 - 1.5V for a 3V excitation (ratiometric for other excitation voltages)
Resolution:
0.1% VWC (Volumetric Water Content)
Cable Length:
6.1m with a 2.5 mm DIN (male) connector
Accuracy:
3% VWC @ EC < 8 mS/cm
Sensing Area:
2.4 in (6 cm) x 0.8 in (2 cm)